How To Fix Dishwasher Soap Dispenser Door Latch

Do you have a dishwasher soap dispenser door latch that needs fixing? Then we recommend paying close attention to the article ahead.

What is a dishwasher soap dispenser?

If you have a dishwasher placed in your kitchen, chances are that you also have a dishwasher soap dispenser. The dishwasher soap dispenser of course as the name suggests will dispense soap when you need it. It works with a mechanism known as a spring-operated door latch.

It is directly connected with the controls of your dishwasher and therefore it functions automatically to dispense soap when the dishwasher needs it. The controls then send the function to the soap dispenser and it opens up to produce soap that you can use.

However, many times, you will find that instead of working properly, your dishwasher soap dispenser does not work the way you would like. This is a clear indication that there is something wrong with the door latch. Today we will learn how to fix dishwasher soap dispenser door latch.

Why does the need arise to fix the dishwasher soap dispenser door latch?

There can be quite a few reasons why your dishwasher soap dispenser door latch is not working. Here are the top 3 reasons:

It might be too old. Let’s face it, most of us had our dishwashers when we had our kitchen made the first time! That means our dishwasher might be well past its expiration date. While they mostly last for longer, it depends on the amount of use you are getting out of them as well.

Whether you have a name brand or any dishwasher, they are both prone to withering away and get older. The best solution, in this case, is to invest in a new door latch for the soap dispenser.

It needs more maintenance. You will find that some parts of your dishwasher will need more maintenance than others! This includes the dishwasher soap dispenser door latch. So, you need to make sure that you are at least cleaning it often so it doesn’t get dirty or soapy residue stuck on it.

Another way to ensure your device is clean is to invest in lubricants and oils that will help keep the door latch in better condition so that its movement is swift and smooth.

There is an issue with the internal components. In case, neither of these were the issues, then you might need to look towards there being a problem with the internal components. If there is something wrong with the internal parts, then they might be broken or malfunctioning. If a section is broken, you might need to figure out a good solution or replace it.

Now that we have a few of the key basics out of the way, we are now going to look at how to fix a dishwasher soap dispenser door latch at home and without the need for a professional’s help!

How to fix dishwasher soap dispenser door latch?

1. The first step is to power off your dishwasher

The first step is the easiest but also the most vital. You cannot start any repairs or fixing process without unplugging the electrical supply first. This is an important safety measure that will ensure you don’t touch any live wires.

To make sure that the dishwasher is powered off, we recommend that you turn the dishwasher on once. This will ensure that it is not active and you are perfectly safe. Attempt to turn the dishwasher on once you have removed it from the electric supply.

2. The next step is to take out the door and control panels.

You can now begin to open the dishwasher door for the next step then take out all Number 15 Torx head screws. These will be placed on the dishwasher door’s edge. You will need a screwdriver to remove each screw. Then, you can close the door. After this, tug at the front part via the entrance of the dishwasher. You will also need to get to the door panel’s backside.

3. The third step is to take out the dispenser

To take the dispenser out of the dishwasher, you will first need to detach any fabric-like material on top. Once this is done, you will get access to the spring connected to the actuator arm. If you find that the spring is not in the right sort of position, you might need to replace it or set it correctly.

After this, tug at the wires protruding from the dispenser body and take out all screws to get to the internal side of the door. Then, you can take the bracket part out, and then you’ll access the dishwasher door to get to the dispenser.

4. The fourth step is to add in a new component

Your next step after taking the dispenser out is to add in a new one! For this, you will need to connect the new dispenser components to your dishwasher’s door panel. You can then shut the main door. After this, you will also need to change the bracket part of your device. Make sure you don’t forget to tighten back the nails that had been removed earlier.

5. The fifth and final step is to add the door and control panel back

Finally, we have now added in the dispenser and we are almost done. The last step is to attach the wiring system to the new dispenser. After this, you can remove the screws that you took out from the dishwasher’s inner panel.

After this, you can simply connect the dishwasher to the electric socket and turn it on. A simple test to get the dishwasher to dispense some soap will be enough to check if your repairing process is a success.

Conclusion:

With that, we are at the end of today’s review on how to fix dishwasher soap dispenser door latch. While we agree that the task might be a bit technical for some of our readers, it shouldn’t be too difficult for you to execute as long as you follow the steps. Hopefully, with this in-depth guide, you can easily solve the issue yourself and not have to rely on a professional for help.

Related Posts:

1.What to do when a Whirlpool Dishwasher not drying dishes/

2.How to Reset Electrolux Dishwasher

3.How to build a kitchen island with sink and dishwasher/